on-line book icon



table of contents





INDEPENDENCE
National Historical Park
NPS logo



Two Centuries of Independence Hall

building plan
Plan of the State House, 1732, attributed to Andrew Hamilton. The elevation of the main building shows it substantially as first built. A skimpy plan like this seems inadequate to people of the 20th century, accustomed to meticulous architectural drawings. Detailed drafts had not been introduced in the 1700's; rather, the master builders in the field were a combination of what we would call today architects, engineers, and workmen. On them lay the burden of supplying the technical details between the simple sketch and the finished structure. Such a man was Edmund Woolley, master carpenter of the State House.
Courtesy Historical Society of Pennsylvania.

Andrew Hamilton
Andrew Hamilton, an eminent lawyer and Speaker of the Assembly, superintended the building of the State House.
From a portrait copied by Adolf Wertmuller (1751—1811) from an original now lost. Courtesy Historical Society of Pennsylvania.

In February 1752, in order to accommodate its committees, the Assembly ordered the erection of a suitable room adjoining the southeast corner of the building. Work was begun immediately, and the room was completed some time during the following year. Demolished probably around 1812, the chamber was described by a contemporary as "a very elegant apartment." This room also served as the library of the Assembly and was well equipped with sets of English statutes along with works on history and literature.

With the completion of the committee room and library, no additional structures were erected in the State House Yard during the Colonial period. However, other buildings were contemplated. On February 20, 1736, the Assembly reserved the lots on Chestnut Street at the corners of Fifth and Sixth Streets for the erection of a city hall and county courthouse within the next 20 years, but these buildings were not constructed until several years after the Revolution.

sketch of State House
The State House as it appeared in the Colonial period, showing the wings, connecting "piazzas" with stairways, and original steeple. As first designed (see preceding illustration) and built, the State House had no tower or steeple. These were added around mid-century, and a bell was ordered for the steeple in 1751. This State House bell, which was hung in the new addition in 17553, has since become renowned as the Liberty Bell. This drawing and the next six are modern illustrations based on 18th-century written descriptions and pictures.

sketch of State House
The State House, about 1776, with wing buildings adjoined by wooden sheds. These were used during the Revolutionary War to store ammunition and, perhaps, to shelter Indian delegations at various times. The wings were used as office space and, in part, even as living quarters for the doorkeeper and his family.

sketch of State House
By 1773, the steeple had rotted to a dangerous extent. It had become so weak that ringing of the hell was avoided for fear of toppling the steeple. Though the Pennsylvania Assembly had long intended to remove this hadly decayed structure, it was not done till 1781—the year of the British surrender at Yorktown, Va. After the steeple was removed, the brick tower was covered with a hipped roof, shown here, and the hell hung just below it.

sketch of State House
The wooden sheds were removed some time after 1787 to make way for the City Hall on the east (left) and County Courthouse on the west (right). Begun in 1790 and 1787 and completed in 1791 and 1789, respectively, these buildings fulfilled the original plan of a city governmental center as conceived by Andrew Hamilton. With the establishment of the temporary Federal capital in Philadelphia, from 1790 to 1800, City Hall became the seat of the U. S. Supreme Court and the County Courthouse became Congress Hall.

sketch of State House
In 1812, the Pennsylvania Legislature permitted the City and County of Philadelphia, which occupied the State House after the Federal and State capitals moved from Philadelphia, to pull down the east and west wings and erect in their places "modern" office buildings, designed by the architect Robert Mills. These buildings were used for the purposes of municipal administration and storing records. Because of the burden on public funds, the State House was dangerously close to being torn down at this time. It was spared that fate when the City bought the group of buildings and the square from the Commonwealth of Pennsylvania in 1818 for $70,000.

sketch of State House
Lafayette's visit, in 1824, started a move to lift the State House from neglect and direct attention to it as a shrine. In line with this new attitude, attempts were made to restore the building to its original appearance. The first important step in this direction was the restoration of a steeple to the building. William Strickland, the famous American architect, designed a new one which was constructed in 1828; it was not an exact replica, but followed the general design of its predecessor removed in 1781. The principal deviations were the installation of a clock in the steeple and the use of more ornamentation.

sketch of State House
Although various alterations were made to the interior of the State House—by now, generally called Independence Hall—in the mid-nineteenth century, appreciable exterior changes were not made till just before 1900. Between 1896 and 1898, as part of the City's general program for the restoration of Independence Square to its appearance during the Revolution, the Mills buildings were replaced by wings and arcades which resembled those of the 18th century. The buildings have retained this appearance to the present day.


Next





top of page



Last Modified: Mon, Dec 2 2002 10:00:00 am PDT
publications/hh/17/hh17b.htm